HIRING OPERATORS AND TECHNICIANS FOR SAUDI ARABIA

 

HIRING OPERATORS AND TECHNICIANS FOR SAUDI ARABIA

1. Lath machine operators (4)
2. Metal mechanic- Fabricator (1)
3. Welder (1)
4. Mechanical Technician (2)
5. Electrical Technician (2)
6. Instrument Technician (2)
7. Programmer (1)
8. Maintenance Electrician (4)
9. Process Control Tech (4)
10. Mechanical Inspectors (3)

LATHE MACHINE OPERATORS

1. Experience Required: Must have 9 years minimum work experience
2. Must have a valid driver license.
3. Must have a good vision (20/20 normal)
4. Must be willing to work in assigned remote areas.
5. Must know how to operate and utilize the manual lathe machine.
6. Candidate with experience in the field of Oil & Gas Field
7. Able to read/write and speak English fluently.
8. Capable to read drawings
9. Familiar with most of the fabrication material that can be used in Oil
10. & Gas Operations.
11. Work within precise limits or standards of accuracy
12. Interpret blueprints and sketches for industrial fabrication processes.
13. Able to fabricate complicated parts such as double threads parts.

Metal mechanic- Fabricator

Experience Required:

 Must have 9 years minimum work experience.

2 Must have a valid driver's license.

3. Must have a good vision (20/20 normal)

4. Must be willing to work in assigned remote areas.

5. Candidate with experience in the field of Oil & Gas Field

6. Capable to read Isometrics drawings

7. Familiar with most of piping material that can be used in Oil & Gas

Operations.

8. Able to read/write and speak English fluently.

9. Site measurement fabrication and weld preparation of large and small

Saudi Aramco: Company General Use

carbon steel pipework 

10. Work within precise limits or standards of accuracy

11. Interpreted blueprints and sketches for industrial fabrication

processes.

Welder

Experience Required: Must have 9 years minimum work experience.

2. Must read, write and speak English fluently.

3. Must have a valid driver's license.

4. Must have a good vision (20/20 normal)

5. Must be willing to work in assigned remote areas.

6. Preferably to have an Aramco certification or Welder Job Clearance

Card or he should be certified by:

a. In-Kingdom Welders Shall be qualified by approved WTA

(NDT or Mechanical according to ASME SEC IX).

b. Out-of-Kingdom Welders

i. The testing laboratory shall be ISO 17025 Certified.

ii. Conduct both Non-destructive Examination (NDE)

and Mechanical testing according to ASME SEC IX.

iii. Welder’s qualification coupon must be

witnessed by assigned third party inspector through

primary contractor.

7. He should be certified for SMAW, GTAW (TIG) welding processes.

8. Preferable to have the ability to weld carbon steal and stainless steal

pipes.

9. He should be certified for small pipes sizes

10. He should have a low failure rate with approved record.

Electrical Technician 

1- Performs Low and medium voltage electrical system troubleshooting

2- Rich knowledge on UPS and Battery charge systems

3- Rich knowledge on Solar system application

4- Supplemented knowledge in instrumentation system and

troubleshooting.

Mechanical Technician 

Experience :08 Special Field Experience : in the machinist

Instrument Technician

8 years experience in the instrumentation field.

INTERESTED CANDIDATES CAN CONTACT IMMEDIATELY

Email:- bdmmumbai123@gmail.com

Call     9819013684